We usually see beer kegs in parties or picnic especially with our family and friends. People who are thirsty drink a lot and so it is very cost effective to have a keg in the available since it also saves you a lot of money. IF you have a keg tap, this device will allow you to release the beer into your drinking cup from the keg. If you do not know how to use a keg tap, then you can waste a lot of beer, and this is why you need to be careful is using it since it is actually easy to use. Foam can be released from the keg tap if not done properly, and it can go all over your face or your body. Getting beer from a keg tap looks easy but it is not as easy as it looks.
In order to get beer from the keg, you need to control the keg tap. This uses a lever and through pulling and pressing it, the beer is released. It works by releasing the pressure, which in turn pushes the beer up and into a glass or a container. The keg tap is technically a switch and may be an on-off or a close-open switch.
With the beer key directly In front of you, you need to place the beer keg in a stead position for a short while so that the foam it creates when pouring is minimized. The foam builds up when the keg is transported especially when there is too much movement. Let it stay for a while and place the keg where you plan to serve the beer to minimize the foam. You should remove the cap or seal since it is harder to tap with it. Pros don’t remove the cap or seal because they know how not to put the beer at risk. You need to play it safe.
A portable keg system can be tapped with CO2. The keg receives pressure in a single unit pump and tap combination and this is called party pump. The beer keg tap is separated from the keg. To release the pressure in the ked, the pump is attached and the faucet is opened. Air pressure is applied to the keg by pumping and when the lever is pushed, which is the tap handle, beer is released.
A pony keg or portable beer keg should be consumed in one day because the beer loses its flavor once the air is mixed with the beer. In a traditional keg and on and off valve is used. By using this, you are serving by gravity, and there is no air pressure needed. When the valve is used, you simply turn to open or close the keg to get some beer.